Please read all of this for a more complete X information ;-)
From Uwe Bonnes <firstname.lastname@example.org>:
xdosemu (dosemu.bin -X) is now a lot more capable. In particular it should now understand the keys from the keypad-area (the keys the most right on a MF-Keyboard) and numlock and keyevents in the range of the latin characters, even when you run xdosemu from a remote X-terminal. It also is capable to handle PL4 color modes in addition to 256 color modes, so bgidemo from Borland runs fine.
From Rainer Zimmermann <email@example.com>
Some basic information about DOSEMU's X support. Sometimes it's even sort of useable now.
What you should take care of:
If backspace and delete do not work, you can try 'xmodmap -e "keycode 22 = 0xff08"' to get use of your backspace key, and
'xmodmap -e "keycode 107 = 0xffff"' to get use of your delete key.
Make sure DOSEMU has X support compiled in. (X_SUPPORT = 1 in the Makefile)
you should have the vga font installed. See README.ncurses.
start DOSEMU with `xdosemu' (or `dosemu.bin -X' when bypassing the wrapper) from an X terminal window. Or make a link to 'dosemu.bin' named 'xdos' - when called by that name, DOSEMU will automatically assume -X. There is also a new debug flag 'X' for X-related messages. To exit xdosemu, use 'exitemu' or select 'Close' aka 'Delete' (better not 'Destroy') from the 'Window' menu. It is also save to use <Ctrl><Alt><PgDn> within the window to exit DOSEMU. Use <Ctrl><Alt><Pause> to pause and unpause the DOSEMU session, which is useful if you want it to sit silently in the background when it is eating too much CPU time.
there are some X-related configuration options for dosemu.conf. See ./etc/dosemu.conf for details.
Keyboard support of course depends on your X keyboard mappings (xmodmap). If certain keys don't work (like Pause, Backspace,...), it *might* be because you haven't defined them in your xmodmap, or defined to something other than DOSEMU expects.
using the provided icon (dosemu.xpm):
you need the xpm (pixmaps) package. If you're not sure, look for a file like /lib/libXpm.so.*
you also need a window manager which supports pixmaps. Fvwm is fine, but I can't tell you about others. Twm probaby won't do.
copy dosemu.xpm to where you usually keep your pixmap (not bitmap!) files (perhaps /usr/include/X11/pixmaps)
tell your window manager to use it. For fvwm, add the following line to your fvwmrc file:
Icon "xdosemu" dosemu.xpm
This assumes you have defined a PixmapPath. Otherwise, specify the entire pathname.
note that if you set a different icon name than "xdosemu" in your dosemu.conf, you will also have to change the fvwmrc entry.
restart the window manager. There's usually an option in the root menu to do so.
Now you should see the icon whenever you iconify xdosemu.
Note that the xdosemu program itself does not include the icon - that's why you have to tell the window manager. I chose to do it this way to avoid xdosemu requiring the Xpm library.
If anything else does not work as expected, don't panic :-) Remember the thing is still under construction. However, if you think it's a real bug, please tell me.
We've made some major changes in X.c that enables X to run graphics modes. Unfortunately, this disables the cut-and-paste support, but we think the graphics stuff is much more fun (after things have established, we'll put the cut-and-paste stuff back). The graphics is done through vgaemu, the VGA emulator. Status of the work:
Video memory. 1 Mb is allocated. It is mapped with mmap() in the VGA memory region of DOSEMU (0xa00000-0xbfffff) to support bank switching. This is very i386-Linux specific, don't be surprised if it doesn't work under NetBSD or another Linux flavour (Alpha/Sparc/MIPS/etc).
The DAC (Digital to Analog Converter). The DAC is completely emulated, except for the pelmask. This is not difficult to implement, but it is terribly slow because a change in the pelmask requires a complete redraw of the screen. Fortunately, the pelmask changes aren't used often so nobody will notice ;-)
The attribute controller is partially emulated. (Actually, only reads and writes to the ports are emulated)
The working modes are 0x13 (320x200x256) and some other 256 color modes.
To do (in no particular order): font support in graphics modes (8x8, 8x16, 9x16, etc), text mode support, 16, 4 and 2 color support, better bank switching, write the X code out of vgaemu to get it more generic.
VESA set/get mode, get information and bankswitch functions work.
All VESA 256 color (640x480, 800x600, 1024x768) modes work, but due to bad bank switch code in vgaemu they won't display right.
A VESA compatible video BIOS is mapped at 0xc00000. It's very small, but in future it's a good place to store the BIOS fonts (8x8, 8x16) in.
To do: implement the other VESA functions.
Added own colormap support for the 256 color modes.
Support for vgaemu.
To do: remove text support and let vgaemu do the text modes, put back the cut-and-paste stuff, more cleanups.
NOTE: we've developed on X servers with 8 bit pixel depths (XF86_SVGA) so we don't know how our code behaves on other pixel depths. We don't even know if it works.
As stated before, this code was written for Linux (tested with 1.2.13 and 1.3.39) and we don't know if it works under NetBSD. The mmap() of /proc/self/mem and mprotect() magic in vgaemu are very (i386) Linux specific.
Steffen Winterfeldt <firstname.lastname@example.org>
I've been working on the X code and the VGA emulation over the last few months. This is the outcome so far:
graphics support in X now works on all X servers with color depth >= 8
the graphics window is resizeable
support for hi- and true-color modes (using Trident SVGA mode numbers and bank switching)
some basic support for mode-X type graphics modes (non-chain4 modes as used by e.g. DOOM)
some even more basic support for 16 color modes
nearly full VESA 2.0 support
gamma correction for graphics modes
video memory size is configurable via dosemu.conf
initial graphics window size is configurable
The current implementation supports 4 and 8 bit SVGA modes on all types of X display. Hi-color modes are supported only on displays matching the exact color depth (15 or 16); true color modes are supported only on true color X displays, but always both 24 bit and 32 bit SVGA modes.
In addition, the current hi- and true color support does not allow resizing of the graphics window and gamma correction is ignored.
As the typical graphics mode with 320x200x8 will be used often with large scalings and modern graphics boards are pretty fast, I added something to eat up your CPU time: you can turn on the bilinear interpolation. It greatly improves the display quality (but is rather slow as I haven't had time yet to implement an optimized version - it's plain C for now). If the bilinear filter is too slow, you might instead try the linear filter which interpolates only horizontally.
Note that (bi)linear filtering is not available on all VGA/X display combinations. The standard drawing routines are used instead in such cases.
If a VGA mode is not supported on your current X display, the graphics screen will just remain black. Note that this does not mean that xdosemu has crashed.
The VESA support is (or should be) nearly VBE 2.0 compatible. As a reference I used several documents including the unofficial VBE 2.0 specs made available by SciTech Software. I checked this against some actual implementations of the VBE 2.0 standard, including SciTech's Display Doctor (formerly known as UniVBE). Unfortunately implementations and specs disagree at some points. In such cases I assumed the actual implementation to be correct.
The only unsupported VBE function is VGA state save/restore. But this functionality is rarely used and its lack should not cause too much problems.
VBE allows you to use the horizontal and vertical scrolling function even in text modes. This feature is not implemented.
If you think it causes problems, the linear frame buffer (LFB) can be turned of via dosemu.conf as well as the protected mode interface. Note, however, that LFB modes are faster than banked modes, even in DOSEMU.
The default VBE mode list defines a lot of medium resolution modes suitable for games (like Duke3D). You can still create your own modes via dosemu.conf. Note that you cannot define the same mode twice; the second (and all subsequent) definitions will be ignored.
Modes that are defined but cannot be supported due to lack of video memory or because they cannot be displayed on your X display, are marked as unsupported in the VBE mode list (but are still in it). Note that there is currently no support of 4 bit VESA modes.
The current interface between VGAEmu and X will try to update all invalid video pages at a time. This may, particularly in hi-res VBE/SVGA modes, considerably disturb DOSEMU's signal handling. That cannot be helped for the moment, but will be addressed soon (by running an extra update thread).
If you really think that this is the cause of your problem, you might try to play with veut.max_max_len in env/video/n_X.c, near line 2005. This variable limits the amount of video memory that is updated during one timer interrupt. This way you can dramatically reduce the load of screen updates, but at the same rate reduce your display quality.
Gamma correction works in both 4 and 8 bit modes. As the dosemu.conf parser doesn't support float values, it must be specified as a percentage value: gamma 100 = gamma 1.0. Higher values give brighter graphics, lower make them darker. Reasonable values are within a range of 50 ... 200.
You can specify the video memory size that the VGA emulator should use in dosemu.conf. The value will be rounded up to the nearest 256 kbyte boundary. You should stick to typical values like 1024, 2048 or 4096 as not to confuse DOS applications. Note that whatever value you give, 4 bit modes are only supported up to a size of 800x600.
You can influence the initial size of the graphics window in various ways. Normally it will have the same size (in pixel) as the VGA graphics mode, except for mode 0x13 (320x200, 256 colors), which will be scaled by the value of mode13fact (defaults to 2). Alternatively, you can directly specify a window size in dosemu.conf via winsize. You can still resize the window later.
The config option fixed_aspect allows you to fix the aspect ratio of the graphics window while resizing it. Alternatively, aspect_43 ties the aspect ratio to a value of 4:3. The idea behind this is that, whatever the actual resolution of a graphics mode is in DOS, it is displayed on a 4:3 monitor. This way you won't run into problems with modes such as 640x200 (or even 320x200) which would look somewhat distorted otherwise.
All standard vga modes work now. For planar modes, vgaemu has to switch to part ial cpu emulation. This can be slow, but expect it to improve over time. The mode-X applications work fine as well, since the cpu emulation they need is exactly the same as for the planar 16 color modes. Applications that ask for a 320x240 or other non-standard mode, for instance, have this request honoured by vgaemu and should work fine as well.
Fonts are present in the VESA bios now. They should work fine in all graphics modes.