2. Runtime Configuration Options

This section of the document by Hans, <lermen@fgan.de>. Last updated on Sep 27, 2003, by Bart Oldeman.

Most of DOSEMU configuration is done during runtime and per default it can use the system wide configuration file dosemu.conf (which is often situated in /etc or /etc/dosemu) optionally followed by the users ~/.dosemurc and additional configurations statements on the commandline (-I option). If /etc/dosemu.users exists then dosemu.conf is searched for in /etc and otherwise in /etc/dosemu (or an alternative sysconfdir compiletime-setting).

The default dosemu.conf and ~/.dosemurc have all settings commented out for documentation purposes; the commented out values are the ones that DOSEMU uses by default. Note that a non-suid type of installation does not need the dosemu.users and dosemu.conf files, and the main per-user configuration file is $HOME/.dosemurc. However, for security reasons, a suid-root installation will not run without dosemu.users, and in that case certain dosemu.conf settings are ignored by ~/.dosemurc.

In fact dosemu.conf and ~/.dosemurc (which have identical syntax) are included by the systemwide configuration script global.conf which, by default, is built into the DOSEMU binary. As a normal user you won't ever think on editing this, only dosemu.conf and your personal ~/.dosemurc. The syntax of global.conf is described in detail in README-tech.txt, so this is skipped here. However, the option -I string too uses the same syntax as global.conf, hence, if you are doing some special stuff (after you got familar with DOSEMU) you may need to have a look there.

In DOSEMU prior to 0.97.5 the private configuration file was called ~/.dosrc (not to be confused with the new ~/.dosemurc). This will work as expected formerly, but is subject to be nolonger supported in the near future. This (old) ~/.dosrc is processed after global.conf and follows (same as -I) the syntax of global.conf (see README-tech.txt).

The first file expected (and interpreted) before any other configuration (such as global.conf, dosemu.conf and ~/.dosemurc) is /etc/dosemu.users or /etc/dosemu/dosemu.users. As mentioned above, this file is entirely optional for non-suid-root (default) installations. Within this file the general permissions are set:

and further more:

Except for lines starting with `xxx=' (explanation below), each line in dosemu.user corresponds to exactly one valid user count, the special user `all' means any user not mentioned earlier. Format:
      [ <login> | all ] [ confvar [ confvar [ ... ] ] ]

The below example is from etc/dosemu.users.secure, which you may copy to /etc/dosemu.users.
      root c_all     # root is allowed to do all weird things
      nobody nosuidroot guest # variable 'guest' is checked in global.conf
                              # to allow only DEXE execution
      guest nosuidroot guest  # login guest treated as `nobody'
      myfriend c_all unrestricted private_setup
      myboss nosuidroot restricted private_setup
      all nosuidroot restricted # all other users have normal user restrictions
Note that the above `restricted' is checked in global.conf and will disable all secure relevant feature. Setting `guest' will force setting `restricted' too.

The use of `nosuidroot' will force a suid root dosemu binary to exit, the user may however use a non-suid root copy of the binary. For more information on this look at README-tech, chapter 11.1 `Privileges and Running as User'

Giving the keyword `private_setup' to a user means he/she can have a private DOSEMU lib under $HOME/.dosemu/lib. If this directory is existing, DOSEMU will expect all normally under DOSEMU_LIB_DIR within that directory. As this would be a security risk, it only will be allowed, if the used DOSEMU binary is non-suid-root. If you realy trust a user you may additionally give the keyword `unrestricted', which will allow this user to execute a suid-root binary even on a private lib directory (though, be aware).

In addition, dosemu.users can be used to define some global settings, which must be known before any other file is accessed, such as:
      default_lib_dir= /opt/dosemu  # replaces DOSEMU_LIB_DIR
      log_level= 2                  # highest log level

With `default_lib_dir=' you may move DOSEMU_LIB_DIR elsewhere, this mostly is interesting for distributors, who want it elsewhere but won't patch the DOSEMU source just for this purpose. But note, the dosemu supplied scripts and helpers may need some adaption too in order to fit your new directory.

The `log_level=' can be 0 (never log) or 1 (log only errors) or 2 (log all) and controls the ammount written to the systems log facility (notice). This keyword replaces the former /etc/dosemu.loglevel file, which now is obsolete.

Nevertheless, for a first try of DOSEMU you may prefer etc/dosemu.users.easy, which just contains
      root c_all
      all c_all
to allow everybody all weird things. For more details on security issues have a look at README-tech.txt chapter 2.

After the file dosemu.users, the file dosemu.conf (via global.conf, which may be built-in) is interpreted, and only during global.conf parsing the access to all configuration options is allowed. dosemu.conf normally lives in the same directory as dosemu.users, for instance /etc/dosemu or /etc (that is, sysconfdir in compiletime-settings). Your personal ~/.dosemurc is included directly after dosemu.conf, but has less access rights (in fact the lowest level), all variables you define within ~/.dosemurc transparently are prefixed with `dosemu_' such that the normal namespace cannot be polluted (and a hacker cannot overwrite security relevant enviroment variables). Within global.conf only those ~/.dosemurc created variables, that are needed are taken over and may overwrite those defined in dosemu.conf.

The dosemu.conf (global.conf) may check for the configuration variables, that are set in dosemu.users and optionaly include further configuration files. But once dosemu.conf (global.conf) has finished interpretation, the access to secure relevant configurations is (class-wise) restricted while the following interpretation of (old) .dosrc and -I statements.

For more details on security settings/issues look at README-tech.txt, for now (using DOSEMU the first time) you should need only the below description of dosemu.conf (~/.dosemurc)

2.1. Format of dosemu.conf and ~/.dosemurc

All settings are variables, and have the form of

      $_xxx = (n)
      $_zzz = "s"

where `n' ist a numerical or boolean value and `s' is a string. Note that the brackets are important, else the parser won't decide for a number expression. For numers you may have complete expressions ( such as (2*1024) ) and strings may be concatenated such as

      $_zzz = "This is a string containing '", '"', "' (quotes)"

Hence a comma separated list of strings is concatenated.

2.1.1. Disks, boot directories and floppies

The parameter settings are tailored to fit the recommended usage of disk and floppy access. There are other methods too, but for these you have to look at README-tech.txt (and you may need to modify global.conf). We strongly recommend that you use the proposed techique. Here the normal setup:

    # List of hdimages or boot directories under 
    # ~/.dosemu, the system config directory (/etc/dosemu by default), or
    # syshdimagedir (/var/lib/dosemu by default) assigned in this order
    # such as "hdimage_c directory_d hdimage_e"
    # Absolute pathnames are also allowed.
      $_hdimage = "freedos"
      $_vbootfloppy = ""    # if you want to boot from a virtual floppy:
                            # file name of the floppy image under DOSEMU_LIB_DIR
                            # e.g. "floppyimage" disables $_hdimage
                            #      "floppyimage +hd" does _not_ disable $_hdimage
      $_floppy_a ="threeinch" # or "fiveinch" or empty, if not existing
      $_floppy_b = ""       # dito for B:

A hdimage is a file containing a virtual image of a DOS-FAT filesystem. Once you have booted it, you (or autoexec.bat) can use `lredir' to access any directory in your Linux tree as DOS drive (a -t msdos mounted too). Look at chapter 5 (Using Lredir) and for more details. If you want to create your own hdimage use "mkfatimage16" (see the manual page). To make it bootable you can make it, say, drive F:, and use "SYS F:" at the DOS prompt. The DOSEMU-HOWTO explains how to manipulate it using mtools.

Starting with dosemu-0.99.8, there is a more convenient method available: you just can have a Linux directory containing all what you want to have under your DOS C:. Copy your IO.SYS, MSDOS.SYS or what ever to that directory (e.g. DOSEMU_LIB_DIR/bootdir), set
       $_hdimage = "bootdir"
and up it goes. Alternatively you can specify an absolute path such as "/dos" or "/home/username/dosemu/freedos". DOSEMU makes a lredir'ed drive out of it and can boot from it. You can edit the config.sys and the autoexec.bat within this directory before you start dosemu. Further more, you may have a more sohisticated setup. Given you want to run the same DOS drive as you normal have when booting into native DOS, then you just mount you DOS partition under Linux (say to /dos) and put links to its subdirectories into the boot dir. This way you can decide which files/directories have to be visible under DOSEMU and which have to be different. Here a small and not complete example bootdir setup:
      command.com -> /dos/command.com
      io.sys -> /dos/io.sys
      msdos.sys -> /dos/msdos.sys
      dos -> /dos/dos
      bc -> /dos/bc
      windows -> /dos/windows

As a further enhancement of your drives setup you may even use the following strategie: Given you have the following directory structure under DOSEMU_LIB_DIR
and the C, D, E are symlinks to appropriate DOS useable directories, then the following single statement
      $_hdimage = "drives/*"
will assign all these directories to drive C:, D:, E: respectively. Note, however, that the order in which the directories under drives/* are assigned comes from the order given by /bin/ls. Hence the folling
will assign C: to drives/a and D: to drives/x, keep that in mind.

Now, what does the above `vbootfloppy' mean? Instead of booting from a virtual `disk' you may have an image of a virtual `floppy' which you just created such as `dd if=/dev/fd0 of=floppy_image'. If this floppy contains a bootable DOS, then

      $_vbootfloppy = "floppy_image"

will boot that floppy. Once running in DOS you can make the floppy available by (virtually) removing the `media' via `bootoff.com'. If want the disk access specified via `$_hdimage' anyway, you may add the keyword `+hd' such as

      $_vbootfloppy = "floppy_image +hd"

In some rare cases you may have problems accessing Lredir'ed drives (especially when your DOS application refuses to run on a 'network drive'), For this to overcome you may need to use socalled `partition access', use a floppy (or a "vbootfloppy"), or a special-purpose hdimage. The odd with partition access is, that you never should have those partition mounted in the Linux file system at the same time as you use it in DOSEMU (which is quite uncomfortable and dangerous on a multitasking OS such as Linux ). Though global.conf checks for mounted partitions, there may be races that are not caught. In addition, when your DOSEMU crashes, it may leave some FAT sectors unflushed to the disk, hence destroying the partition. Anyway, if you think you need it, you must have r/w access to the partition in /dev, and you have to `assign' real DOS partitions as follows:

      $_hdimage = "hdimage.first /dev/hda1 /dev/sdc4:ro"

The above will have `hdimage.first' as booted drive C:, /dev/hda1 as D: (read/write) and /dev/sdc4 as E: (readonly). You may have any kind of order within `$_hdimage', hence

      $_hdimage = "/dev/hda1 hdimage.first /dev/sdc4:ro"

would have /dev/hda1 as booted drive C:. Note that the access to the /dev/* devices must be exclusive (no other process should use it) except for `:ro'.

2.1.2. Controling amount of debug output

DOSEMU will help you finding problems, when you enable its debug messages. These will go into the file, that you defined via the `-o file' or `-O' commandline option (the later prints to stderr). If you do not specify any -O or -o switch, then the log output will be written to ~/.dosemu/boot.log. You can preset the kind of debug output via

      $_debug = "-a"
where the string contains all you normally may pass to the `-D' commandline option (look at the man page for details).

2.1.3. Basic emulation settings

Whether a numeric processor should be shown to the DOS space
      $_mathco = (on)

Which type of CPU should be emulated (NOTE: this is not the one you are running on, but your setting may not exeed the capabilities of the running CPU). Valid values are: 80[345]86
      $_cpu = (80386)

To let DOSEMU use the Pentium cycle counter (if availabe) to do better timing use the below

      $_rdtsc = (on)   # or off

For the above `rdtsc' feature DOSEMU needs to know the exact CPU clock, it normally calibrates it itself, but is you encounter a wrong mesurement you may overide it such as
      $_cpuspeed = (166.666)  # 0 = let DOSEMU calibrate

If you have a PCI board you may allow DOSEMU to access the PCI configuration space by defining the below
      $_pci = (on)    # or off

NOTE: `$_pci' can not be overwritten by ~/.dosemurc.

Starting with dosemu-1.0 there is a flexible way to handle the mapping strategy used by DOSEMU, which is needed by video emulation, EMS, DPMI and XMS support and other stuff to map a given page of memory to the required virtual DOS address space.

Normally DOSEMU will detect the proper mapping driver for the kernel you are using, however, in some cases you may want to define it explicitely to overcome eventual problems. For this you can specify
      $_mapping= "mapfile"
to force the use of the driver, which uses a temporary file. Or on kernels up to 2.2.23 and up to 2.3.27.
      $_mapping= "mapself"
to use mapping on the /proc/self/mem file, which is a lot faster the the `mapfile' driver, but maybe not reliable in conjunction with glibc (NOTE: the kernel since ages has bugs on /proc/self/mem mapping and our workaround doesn't fit exactly together glibc). Kernel 2.2.24 dropped /proc/self/mem mapping because of security issues; kernel 2.3.28 dropped it because of its inherent problems.

Last but not least, if you are using a kernel above 2.3.40, you may use
      $_mapping= "mapshm"
which uses one big IPC shared memory segment as memory pool and the new extended mremap() functionality for the mapping.

Note, that in case of `mapfile' and `mapshm' the size of the file or the segment depend on how much memory you configured for XMS, EMS and DPMI (see below) and that you should take care yourself that you have enough diskspace or have the IPC limits high enough. You can control IPC memory limits with
      # ipcs -m -l
and (on kernels above 2.3.x) you can increase the segment limit with
      # echo "66904064" >/proc/sys/kernel/shmmax
`66904064' being 64 Mbytes in this example.

Defining the memory layout, which DOS should see:
      $_xms = (8192)          # in Kbyte
      $_ems = (2048)          # in Kbyte
      $_ems_frame = (0xe000)
      $_dpmi = (0x5000)       # in Kbyte
      $_dosmem = (640)        # in Kbyte, < 640
Note that (other as in native DOS) each piece of mem is separate, hence DOS perhaps will show other values for 'extended' memory.

If you want mixed operation on the filesystem, from which you boot DOSEMU (native and via DOSEMU), it may be necessary to have two separate sets of config.sys and system.ini. DOSEMU can fake a different file extension, so DOS will get other files when running under DOSEMU. Faking autoexec.bat cannot happen in a reliable fashion, so if you would like to use an autoexec.bat replacement then just use the SHELL command in config.XXX, like this:


      $_emusys = ""    # empty or 3 char., config.sys   -> config.XXX
      $_emuini = ""    # empty or 3 char., system.ini   -> system.XXX

As you would realize at the first glance: DOS will not have the the CPU for its own. But how much it gets from Linux, depends on the setting of `hogthreshold'. The HogThreshold value determines how nice Dosemu will be about giving other Linux processes a chance to run.

      $_hogthreshold = (1)   # 0 == all CPU power to DOSEMU
                             # 1 == max power for Linux
                             # >1   the higher, the faster DOSEMU will be

2.1.4. Code page and character set

To select the character set and code page for use with DOSEMU you have
      $_term_char_set = "XXX"
where XXX is one of


With the kbd_unicode plugin (the default), the text is processed using cp437->cp437 for the display, so the font used must be cp437 (eg cp437.f16 on the console). The text is no longer taken without translation. It never really was but it was close enough it apparently was used that way. When reading characters they are assumed to be in iso-8859-1 from the terminal.

If the old keyboard code is used, then the text is taken whithout translation. It is to the user to load a proper DOS font (cp437.f16, cp850.f16 or cp852.f16 on the console).


the text is processed using cp437->iso-8859-1 translation, so the font used must be iso-8859-1 (eg iso01.f16 on console); which is the default for unix in western languages countries.


like latin, but using cp850->iso-8859-1 translation (the difference between cp437 and cp850 is that cp437 uses some chars for drawing boxes while cp850 uses them for accentuated letters)


like latin1 but uses cp852->iso-8859-2 translation, so translates the default DOS charset of eastern european countries to the default unix charset for those countries.

The default one is ``latin'' and if the string is empty, then an automatic attempt is made: ``ibm'' for remote console and ``latin'' for anything else. Depending on the charset setting the (below described) keyboard layouts and/or the terminal behave may vary. You need to know the correct code page your DOS is configured for in order to get the correct results. For most western european countries 'latin' should be the correct setting.

      $_external_char_set = "XXX"
where XXX is one of
    "cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860",
    "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874",
    "iso8859-1", "iso8859-2", "iso8859-3", "iso8859-4", "iso8859-5", 
    "iso8859-6", "iso8859-7", "iso8859-8", "iso8859-9", "iso8859-14",

The external character set is used to:

  • compute the unicode values of characters coming in from the terminal

  • compute the character set index of unicode characters output to a terminal display screen.

  • compute the unicode values of characters pasted into dosemu.

      $_internal_char_set = "XXX"
where XXX is one of:
    "cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860",
    "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874"

The internal character set is used to:

  • compute the unicode value of characters of video memory

  • compute the character set index of unicode characters returned by bios keyboard translation services.

2.1.5. Terminals

This section applies whenever you run DOSEMU remotely or in an xterm. Color terminal support is now built into DOSEMU. Skip this section for now to use terminal defaults, until you get DOSEMU to work.
      $_term_color = (on)   # terminal with color support
      $_term_updfreq = (4)  # time between refreshs (units: 20 == 1 second)
      $_escchar = (30)      # 30 == Ctrl-^, special-sequence prefix
`term_updfreq' is a number indicating the frequency of terminal updates of the screen. The smaller the number, the more frequent. A value of 20 gives a frequency of about one per second, which is very slow. `escchar' is a number (ascii code below 32) that specifies the control character used as a prefix character for sending alt, shift, ctrl, and function keycodes. The default value is 30 which is Ctrl-^. So, for example,
      F1 is 'Ctrl-^1', Alt-F7 is 'Ctrl-^s Ctrl-^7'.
      For online help, press 'Ctrl-^h' or 'Ctrl-^?'.

2.1.6. Keyboard settings

When running DOSEMU from console (also remote from console) or X you may need to define a proper keyboard layout. Its possible to let DOSEMU do this work automatically for you (see auto below), however, this may fail and you'll end up defining it explicitely. This is done either by choosing one on the internal keytables or by loading an external keytable from DOSEMU_LIB_DIR/keymap/* (which you may modify according to your needs). Both sets have identical names (though you may add any new one to DOSEMU_LIB_DIR/keymap/*):
      be              finnish         hu-latin2       sg-latin1
      de              finnish-latin1  it              sw
      de-latin1       fr              keyb-no         uk
      dk              fr-latin1       no-latin1       us
      dk-latin1       hr-cp852        po
      dvorak          hr-latin2       sf
      es              hu              sf-latin1
      es-latin1       hu-cwi          sg              jp106
      cz-qwerty       cz-qwertz
You define an internal keytable such as
      $_layout = "name"
where `name' is one of the above. To load a keytable you just prefix the string with "load" such as
      $_layout = "load de-latin1"

Note, however, that you have to set
      $_X_keycode = (on)
to use this feature under X, because per default the keytable is forced to be neutral (us). Normally you will have the correct settings of your keyboard given by the X-server.

The most comfortable method, however, is to first let DOSEMU set the keyboard layout itself. This involves 2 parts and can be done by setting
      $_X_keycode = (auto)
which checks for existence of the X keyboard extension and if yes, it sets $_X_keycode to 'on', that means the DOSEMU keytables are active. The second part (which is independent from $_X_keycode) can be set by
      $_layout = "auto"
DOSEMU then queries the keyboard layout from the kernel (which only does work on console or non-remote X) and generates a new DOSEMU keytable out of the kernel information. This currently seems only to work for latin-1 layouts, the latin-2 type of accents seem not to exist so far in the kernel (linux/keyboard.h). The resulting table can be monitor with DOSEMU 'keytable dump' feature (see README-tech.txt) for details).

When being on console you might wish to use raw keyboard, especially together with some games, that don't use the BIOS/DOS to get their keystrokes.
      $_rawkeyboard = (1)
However, be carefull, when the application locks, you may not be able to switch your console and recover from this. For details on recovering look at README-tech.txt (Recovering the console after a crash).

2.1.7. X Support settings

If DOSEMU is running in its own X-window (not xterm), you may need to tailor it to your needs. Here a summary of the settings and a brief description what they mean. A more detailed description of values one can be found at chapter 2.2.14 (X Support settings) of README-tech.txt

    $_X_updfreq = (5)       # time between refreshs (units: 20 == 1 second)
    $_X_title = "DOS in a BOX" # Title in the top bar of the window
    $_X_icon_name = "xdos"  # Text for icon, when minimized
    $_X_keycode = (off)     # on == translate keybord via dosemu keytables
    $_X_blinkrate = (8)     # blink rate for the cursor
    $_X_font = ""           # basename from /usr/X11R6/lib/X11/fonts/misc/*
                            # (without extension) e.g. "vga"
    $_X_mitshm = (on)       # Use shared memory extensions
    $_X_sharecmap = (off)   # share the colormap with other applications
    $_X_fixed_aspect = (on) # Set fixed aspect for resize the graphics window
    $_X_aspect_43 = (on)    # Always use an aspect ratio of 4:3 for graphics
    $_X_lin_filt = (off)    # Use linear filtering for >15 bpp interpol.
    $_X_bilin_filt = (off)  # Use bi-linear filtering for >15 bpp interpol.
    $_X_mode13fact = (2)    # initial factor for video mode 0x13 (320x200)
    $_X_winsize = ""        # "x,y" of initial windows size
    $_X_gamma = (1.0)       # gamma correction
    $_X_vgaemu_memsize = (1024) # size (in Kbytes) of the frame buffer
                            # for emulated vga
    $_X_lfb = (on)  # use linear frame buffer in VESA modes
    $_X_pm_interface = (on) # use protected mode interface for VESA modes
    $_X_mgrab_key = ""      # KeySym name to activate mouse grab, empty == off
    $_X_vesamode = ""       # "xres,yres ... xres,yres"
                            # List of vesamodes to add. The list has to contain
                            # SPACE separated "xres,yres" pairs

2.1.8. Builtin ASPI SCSI Driver

The builtin ASPI driver (a SCSI interface protocol defined by Adaptec) can be used to run DOS based SCSI drivers that use this standard (most SCSI devices ship with such a DOS driver). This enables you to run hardware on Linux, that normally isn't supported otherwise, such as CD writers, Scanners e.t.c. The driver was successfully tested with Dat-streamers, EXABYTE tapedrives, JAZ drives (from iomega) and CD writers. To make it work under DOSEMU you need

  • to configure $_aspi to define which of the /dev/sgX devices you want to show up in DOSEMU.

  • to load the DOSEMU aspi.sys stub driver within config.sys (e.g. DEVICE=ASPI.SYS) before any ASPI using driver.

The $_aspi variable takes strings listing all generic SCSI devices, that you want give to DOSEMU. NOTE: You should make sure, that they are not used by Linux elsewhere, else you would come into much trouble. To help you not doing the wrong thing, DOSEMU can check the devicetype of the SCSI device such as
    $_aspi = "sg2:WORM"
in which case you define /dev/sg2 being a CD writer device. If you omit the type,
    $_aspi = "sg2 sg3 sg4"
DOSEMU will refuse any device that is a disk drive (imagine, what would happen if you try to map a CD writer to the disk which contains a mounted Linux FS?). If you want to map a disk drive to DOSEMU's ASPI driver, you need to tell it explicitely
    $_aspi = "sg1:Direct-Access"
    $_aspi = "sg1:0"
and as you can see, `Direct-Access' is the devicetype reported by
    $ cat /proc/scsi/scsi
which will list all SCSI devices in the order they are assigned to the /dev/sgX devices (the first being /dev/sg0). You may also use the DOSEMU supplied tool `scsicheck' (in src/tools/peripher), which helps a lot to get the configuration right:
    $ scsicheck
    sg0 scsi0 ch0 ID0 Lun0 ansi2 Direct-Access(0) IBM DCAS-34330 S61A
        $_aspi = "sg0:Direct-Access:0" (or "0/0/0/0:Direct-Access:0")
    sg1 scsi0 ch0 ID5 Lun0 ansi2 Direct-Access(0) IOMEGA ZIP 100 D.08
        $_aspi = "sg1:Direct-Access:5" (or "0/0/5/0:Direct-Access:5")
    sg2 scsi0 ch0 ID6 Lun0 ansi2 CD-ROM(5) TOSHIBA CD-ROM XM-5701TA 0167
        $_aspi = "sg2:CD-ROM:6" (or "0/0/6/0:CD-ROM:6") <== multiple IDs
    sg3 scsi1 ch0 ID4 Lun0 ansi2 Sequential-Access(1) HP C1533A 9503
        $_aspi = "sg3:Sequential-Access:4" (or "1/0/4/0:Sequential-Access:4")
    sg4 scsi1 ch0 ID6 Lun0 ansi1 WORM(4) IMS CDD522/10 1.07
        $_aspi = "sg4:WORM:6" (or "1/0/6/0:WORM:6") <== multiple IDs

In the above example there are two scsi hostadapters (scsi0 and scsi1) and DOSEMU will not show more than one hostadapter to DOS (mapping them all into one), hence you would get problems accessing sg2 and sg4. For this you may remap a different targetID such as
    $_aspi = "sg2:CD-ROM:5 sg4:WORM"
and all would be fine. From the DOS side the CD-ROM appears as target 5 and the WORM (CD writer) as target 6. Also from the above scsicheck output, you can see, that you can opt to use a `host/channel/ID/LUN' construct in place of `sgX' such as
    $_aspi = "0/0/6/0:CD-ROM:5 1/0/6/0:WORM"
which is exactly the same as the above example, exept it will assign the right device, even if for some reasons you have changed the order in which sgX device are assigned by the kernel. Those changes happen, if you turned off power of one device `between' or if you play with dynamic allocation of scsi devices via the /proc/scsi interface such as
    echo "scsi remove-single-device 0 0 5 0" >/proc/scsi/scsi
to delete a device and
    echo "scsi add-single-device 0 0 5 0" >/proc/scsi/scsi
to add a device. HOWEVER, we strongly discourage you to use these kernel feature for temporaryly switching off power of connected devices or even unplugging them: normal SCSI busses are not hotpluggable. Damage may happen and uncontroled voltage bursts during power off/on may lock your system !!!

Coming so far, one big problem remains: the (hard coded) buffersize for the sg devices in the Linux kernel (default 32k) may be to small for DOS applications and, if your distributor yet didn't it, you may need to recompile your kernel with a bigger buffer. The buffer size is defined in linux/include/scsi/sg.h and to be on the secure side you may define
    #define SG_BIG_BUFF (128*1024-512)  /* 128 Kb buffer size */
though, CD writers are reported to work with 64Kb and the `Iomega guest' driver happily works with the default size of 32k.

2.1.9. COM ports and mices

We have simplified the configuration for mice and serial ports and check for depencies between them. If all strings in the below example are empty, then no mouse and/or COM port is available. Note. that you need no mouse.com driver installed in your DOS environment, DOSEMU has the mousedriver builtin. The below example is such a setup

      $_com1 = ""           # e.g. "/dev/mouse" or "/dev/cua0"
      $_com2 = "/dev/modem" # e.g. "/dev/modem" or "/dev/cua1"
      $_mouse = "microsoft" # one of: microsoft, mousesystems, logitech,
                            # mmseries, mouseman, hitachi, busmouse, ps2
      $_mouse_dev = "/dev/mouse" # one of: com1, com2 or /dev/mouse
      $_mouse_flags = ""	# list of none or one or more of:
      			# "emulate3buttons cleardtr"
      $_mouse_baud = (0)	# baudrate, 0 == don't set

The above example lets you have your modem on COM2, COM1 is spare (as you may have your mouse under native DOS there and don't want to change the configuration of your modem software between boots of native DOS and Linux)

However, you may use your favorite DOS mousedriver and directly let it drive COM1 by changing the below variables (rest of variables unchanged)

      $_com1 = "/dev/mouse"
      $_mouse_dev = "com1"

And finaly, when you have a PS2 mouse on your machine you use the builtin mousedriver (not your mouse.com) to get it work: ( again leaving the rest of variables unchanged)

      $_mouse = "ps2"
      $_mouse_dev = "/dev/mouse"  

When using a PS2 mouse or when having more then 2 serial ports you may of course assign _any_ free serialdevice to COM1, COM2. The order doesn't matter:

      $_com1 = "/dev/cua2"
      $_com2 = "/dev/cua0"

2.1.10. Printers

Printer is emulated by piping printer data to your normal Linux printer. The belows tells DOSEMU which printers to use. The `timeout' tells DOSEMU how long to wait after the last output to LPTx before considering the print job as `done' and to to spool out the data to the printer.

    $_printer = "lp"        # list of (/etc/printcap) printer names to appear as
                            # LPT1 ... LPT3 (not all are needed, empty for none)
    $_printer_timeout = (20)# idle time in seconds before spooling out

2.1.11. Sound

The following settings will tell DOSEMU to emulate an SB16 sound card using your Linux sound drivers. For more information see sound-usage.txt.

    $_sound = (on)            # sound support on/off
    $_sb_base = (0x220)       # base IO-address (HEX)
    $_sb_irq = (5)            # IRQ
    $_sb_dma = (1)            # Low 8-bit DMA channel
    $_sb_hdma = (5)           # High 16-bit DMA channel
    $_sb_dsp = "/dev/dsp"     # Path to the sound device
    $_sb_mixer = "" 	  # path to the mixer control
    $_mpu_base = (0x330)      # base address for the MPU-401 chip (HEX)

2.1.12. Joystick

Here are the settings for Joystick emulation.

    $_joy_device = "/dev/js0 /dev/js1"     
    			  # 1st and 2nd joystick device 
                              # e.g. "/dev/js0" or "/dev/js0 /dev/js1"
                              #      (or "" if you don't want joystick support)
    $_joy_dos_min = (1)	  # range for joystick axis readings, must be > 0
    $_joy_dos_max = (150)	  # avoid setting this to > 250
    $_joy_granularity = (1)   # the higher, the less sensitive - 
    			  # useful if you have a wobbly joystick
    $_joy_latency = (1)       # delay between nonblocking linux joystick reads
                              # increases performance if >0 and processor>=Pentium
                              # recommended: 1-50ms or 0 if unsure

2.1.13. Networking under DOSEMU

Turn the following option `on' if you require IPX/SPX emulation, there is no need to load IPX.COM within the DOS session. ( the option does not emulate LSL.COM, IPXODI.COM, etc. ) And NOTE: You must have IPX protocol configured into the kernel.

      $_ipxsupport = (on)

Enable Novell 8137->raw 802.3 translation hack in new packet driver.

      $_novell_hack = (on)

If you make use of TUN/TAP or the dosnet device driver, then you can select it via

      $_vnet = "tap"
      $_vnet = "dosnet"

But if you just need 'single' packet driver support that talks to, for instance, your ethernet card eth0 then you need to set

      $_netdev = "eth0"

Note that dosnet and eth0 require raw packet access, and hence (suid)-root. If $_vnet = "dosnet", then $_netdev will default to "dsn0". If you would like to use persistent TUN/TAP devices then you need to specifify the TAP device in $_netdev. For more on this look at chapter 15 (Networking using DOSEMU).

2.1.14. Settings for enabling direct hardware access

The following settings (together with the direct console video settings below make it possible for DOSEMU to access your real (non-emulated) computer hardware directly. Because Linux does not permit this for ordinary users, DOSEMU needs to be run as root or suid-root to be able to use these settings. They can NOT be overwritten by the user configuration file ~/.dosemurc.

Here you tell DOSEMU what to do when DOS wants let play the speaker:
      $_speaker = ""     # or "native" or "emulated"

And with the below may gain control over real ports on you machine. But:


      $_ports = ""  # list of portnumbers such as "0x1ce 0x1cf 0x238"
                    # or "0x1ce range 0x280,0x29f 310"
                    # or "range 0x1a0,(0x1a0+15)"

If you have hardware, that is not supported under Linux but you have a DOS driver for, it may be necessary to enable IRQ passing to DOS.
      $_irqpassing = ""  # list of IRQ number (2-15) to pass to DOS such as
                         # "3 8 10"

2.1.15. Video settings ( console only )


Start with only text video using the following setup

      $_video = "vga"         # one of: plainvga, vga, ega, mda, mga, cga
      $_console = (0)         # use 'console' video
      $_graphics = (0)        # use the cards BIOS to set graphics
      $_videoportaccess = (1) # allow videoportaccess when 'graphics' enabled
      $_vbios_seg = (0xc000)  # set the address of your VBIOS (e.g. 0xe000)
      $_vbios_size = (0x10000)# set the size of your BIOS (e.g. 0x8000)
      $_vmemsize = (1024)     # size of regen buffer
      $_chipset = ""       
      $_dualmon = (0)         # if you have one vga _plus_ one hgc (2 monitors)

After you get it `somehow' working and you have one of the DOSEMU supported graphic cards you may switch to graphics mode changing the below

      $_graphics = (1)        # use the cards BIOS to set graphics

If you have a 100% compatible standard VGA card that may work, however, you get better results, if your card has one of the DOSEMU supported video chips and you tell DOSEMU to use it such as

      $_chipset = "s3"        # one of: plainvga, trident, et4000, diamond, s3,
                              # avance, cirrus, matrox, wdvga, paradise, ati, sis,
    			  # svgalib

Note, `s3' is only an example, you must set the correct video chip else it most like will crash your screen.

The 'svgalib' setting uses svgalib 1.4.2 or greater for determining the correct video chip. It should work with all svgalib drivers, except for "vesa" and "ati", which are dangerous with respect to opening IO-ports.

NOTE: `video setting' can not be overwritten by ~/.dosemurc.